Transform your barflow with the Espresso Parts Bench Top Milk Jug Rinser. This rectangle, bench top rinser enables you to clean milk jugs in seconds so you can get on with the next order in no time at all.
This rinser shoots a powerful stream of cold water into your milk jugs, cups, and servers to thoroughly rinse them in seconds. This means you never have to run back and forth between the sink to clean your milk jugs—they can be cleaned right by your espresso machine in seconds. The rectangle shape leaves some extra drainage room for busy cafes that are concerned about overflow from frequent steaming.
The bench top design allows you to plumb-in, but doesn’t require you to drill permanent holes into your bar, which means you can move the rinser as you improve the layout of your bar over the years.
The stainless steel and BPA-free plastic build will serve you for years, and it’s NSF International Certified, so you never have to worry about whether it’s safe for a cafe setting.
Please note: This is shipped as the rinser only and does not come with the water inlet hose, drain hose, PLV or any other fitting which may be required.
A 350kpa PLV is recommended for all installations. This is to alleviate the possibility of the valve weeping or leaking under the higher pressure and to reduce the possibility of the seal being blown up over the feed holes and restricting the water flow.
We recommend flushing the feed water lines to the rinser before installation especially on new water lines, this is to prevent any debris getting in to the valve and holding the seal of the seat and causing the valve to leak.
Espresso Parts Bench Top Milk Jug Rinser Features
Rinse Jugs In Seconds — Quickly rinses jugs so you can save time and money.
Busy Cafe Drainage — Rectangle sink gives you plenty of room to drain water and milk in a busy cafe setting without having to worry about overflow.
Bench Top Design — Keeps you from having to drill permanent holes into your bar.
Durable Construction — Crafted from stainless steel and strong food-grade plastic.
NSF International Certified — Approved safe for use in food service settings.
This product includes:
- 1 x Espresso Parts Bench Top Milk Jug Rinser
|Materials||Stainless Steel, BPA-Free Plastic|
|Dimensions||152mm x 254mm x 102mm|
|Drain Connector||1/2″ Barb Fitting|
|Water Connector||3/8″ John Guest Press Fitting|